GMX 300 linear (Reference-Nr. 190068)

•  
  Reference number 190068

  Manufacture Year 2007

  Operation Hours not applicable

• Vendor

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Main Category

  Metal working machines

• Category

  Lathes

• Type of Machine

  Turret lathes (Capstan) and turret automatics

• Manufacturer

  DMG MORI

• Control

  Siemens

• Description

  
  

  Working area
  Swing diameter over guide ways	640 mm
  Distance between spindles	1930 mm
  Technical Data
  Drive power (100% DC)	13,2 kW
  Drive power (40% DC)	22 kW
  Torque (40% DC)	100 Nm
  Speed range	20-12000 rpm
  B axis, slide 1
  Swivelling range	+/- 120 degree
  Slide 2
  Longitudinal stroke	1400 mm
  Transverse stroke	225 mm
  Rapid traverse X	24 m/min
  Rapid traverse Z	40 m/min
  Slide 1
  Transverse stroke	550 mm
  Longitudinal stroke	1585 mm
  Y axis, vertical	+/- 110 mm
  Rapid traverse in X	40 m/min
  Rapid traverse in Z	60 m/min
  Rapid traverse in Y	24 m/min
  Main drive 2
  Drive power (100% DC)	25 kW
  Drive power (40% DC)	37 kW
  Speed range	-5000 rpm
  Bench speed	900 rpm
  Max. torque (40% DC)	370 Nm
  C-Axis Speed	-5000 rpm
  Torque of C-Axis (holding torque)	390 Nm
  Main drive 1
  Drive power (100% DC)	25 kW
  Drive power (40% DC)	35 kW
  Speed range	-5000 rpm
  Bench speed	900 rpm
  Max. torque (40% DC)	370 Nm
  C-Axis Speed	-5000 rpm
  Torque of C-Axis (holding torque)	390 Nm
  Work spindle (right)
  Spindle nose	Flat flange
  Diametre of spindle nose	170h5 mm
  Spindle bore	79 mm
  Spindle diametre on front bearing	120 mm
  Spindle capacity	65 mm
  Work spindle (left)
  Spindle nose	Flat flange
  Diametre of spindle nose	170h5 mm
  Spindle bore	79 mm
  Bar diametre	65 mm
  Spindle diametre on front bearing	120 mm
  General
  Turning-milling centre - partial hollow clamping device - drawtube ID 68 mm - C-axis and spindle brake (hydraulically) - upper compound slide with turning-/ milling spindle, reception HSK-A63, DIN 69893 with 3-fold Hirth-coupling 1°-Indexing to lock the spindle during turning operations - Y-axis - B-axis interpolating with hydraulically locking - tool magazine 1 x 60-fold, shelf magazine with tool changer and handling unit, additional 4 tool loading stations; Control: Sinumerik 840D powerline
  Floor space/Weight
  Weight approx.	20000 Kg
  Dimensions (L x W x H)	9,3 x 4,6 x 3,05 m

• Specification

  
  

  Standard equipment 1	- upper compound slide with turning-/ milling spindle, reception HSK-A63, DIN 69893 with 3-fold Hirth-coupling 1°-Indexing to lock the spindle during turning operations - absolut, direct measuring systems in all linear axes
  Standard equipment 2	- chip conveyor, - cooling pump 8 bar (116 psi); 20 l/min (5.28 gal/min) - V24 and Ethernet-interface
  Clamping with balanced pressure, main sp.	Balanced pressure clamping device for the main spindle
  Clamping with balanced pressure, sub-sp.	Balanced pressure clamping device for sub-spindle
  Hollow clamping device mainspindle, Ø 68 mm	Hollow clamping device at the main spindle (left) boring Ø68 mm (2,67 inch)
  Lower compound slide w. tool drive a. turret	star type turret, 12-fold with tool drive, reception 40 mm (1.575 inch) DIN 69880, radial - Lower compound slide (X2, Z2), AC servo drives with ball screws, absolute, direct measuring system
  Torque limiters clutches X1-,Ys-,X2-,Z2-,Z3-axis	Overload clutches for X1-, Ys-, X2-, Z2-, Z3-axis for machine with subspindle and above slide
  Subspindle ISM 65 for GMX 300 Linear	subspindle for GMX 300 Linear as integrated spindle motor ISM 65 - drive power 25/37 kW (33/49 hp) - partial hollow clamping (hydraulical) - draw tube ID 66 mm (2.6 inch) - C-axis and spindle break (hydraulical)

• State

  Used