VL 3

•  
  Reference number 905398

  Manufacture Year 2001

  Operation Hours not applicable

• Vendor

  Wolfgang Finken GmbH
  Dornierstr. 20
  71706 Markgröningen

  Germany

  

• Main Category

  Metal working machines

• Category

  Lathes

• Type of Machine

  Vertical turning machines

• Manufacturer

  EMAG

• Control

  Fanuc 18i TB

• Description

  GENERAL
  
  Project No: 905398
  Quantity: 1 pc.
  Manufacturer: EMAG
  Type: VL 3
  Control: Fanuc 18i TB
  Year of Manufacture: 2001/2022
  Condition: Retrofitted Machine
  Shifts approx.: 2-3 shift
  
  DESCRIPTION
  
  TURNING
  
  Max. Swing diameter over bed cover 210 mm
  Max. Clamping chuck diameter 170 mm
  Max. speed main spindle 7500 1/min
  Max. power main spindle at 10-40/100% duty ratio 25/16 kW
  Max. torque main spindle at 10-40/100% duty ratio 134/85 Nm
  Spindle diameter in front bearing main spindle 80 mm
  Spindle flange size main spindle Gr. 5 (DIN 55026)
  Axis at main spindle unit X/Z
  Travel in X/Y/Z main spindle unit 400/-/200 mm
  Max. rapid traverse in X/Y/Z main spindle unit 60/-/30 m/min
  Feed force X/Y/Z main spindle unit 5000/-/5000 N
  Linear glass scales main spindle unit X/Z
  Solid clamping cylinder at main spindle
  
  Lower turret
  No. of stations/driven 12/12
  Tool reception in turret VDI 40
  Speed tool drive 6000 1/min
  
  FURTHER EQUIPMENT
  
  Fully enclosed work area
  Light in working area
  Oil-/emulsion mist extraction unit
  Slat band chain chip conveyor
  Discharge hight chip conveyor 1250 mm
  Coolant unit 80 l/min at 7 bar
  Loop-type part storage conveyor
  Max. workpiece diameter (27 workpieces with 30-85 mm or 18 workpieces with 30-130 mm) mm
  Max. workpiece length 100 mm
  Automatic central oil lubrication
  
  GENERAL TECHNICAL DATA
  
  Operating voltage 400/50 V/Hz
  Total power requirement 28 kVA
  Machine dimensions (LxWxH) approx. 2500x1900x2300 mm
  Space requirement of the whole equipement (LxWxH) approx. 3600x1900x2300 mm
  Machine weight approx. 5500 kg
  
  REMARKS
  
  We offer a professionally retrofitted machine. All crucial components, like guideways with roller carriages, ball screws, main spindle, bearings in turret and tool drive etc. have been replaced. Please also see attached document.
  .
  We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.

• State

  Used